GVR5 (Ground Vehicle Radio 5) 

Design

DESIGNED FOR VEHICULAR OPERATIONS

Purpose-built solution for infantry fighting vehicles, from installation, compliance with vehicular standards, to sustainment and depot level maintenance – the GVR5 is thoughtfully designed to succeed in combat vehicles.

RUGGEDISED DESIGN

Ballistic Shock Protection

Engineered to meet the most stringent MIL standards, the GVR5 is shock-mounted to protect the radio from any impact damage when traversing difficult terrain or when subject to ballistic and gunfire shock, requirements typically found in heavy ground vehicles.

DESIGNED FOR YOUR VEHICLE

Flexible Mounting Options

The GVR5 has mounting locations on both the top and bottom of the device. This provides flexibility to mount it to a standard shock mounted tray or to mount to below a panel or to the roof of the vehicle.

Space in vehicles is hard to come by, flexible mounting makes it easier to integrate.

MIL-STD-1275 TESTED

Designed For Vehicle Power

The GVR5 power supply is designed to handle the spikes, surges, operating voltages and ripple that is typical of large military ground vehicles.

It is purpose built to handle the intense Initial Engagement Surge (IES) and the Cranking surge from these tactical vehicles.

The GVR5 has been independently tested to meet MIL-STD-1275.

CONTROLS FOR YOUR RF SIGNATURE

Operate Without Being Detected

A RF selection knob on the front panel of the GVR5 is used to select between either individual band, both bands, and complete RF Silence.

When configured for RF Silence, all of the GVR5’s capabilities (networking, video encoding, Cloud Relay) still function.

LIGHT DISCIPLINE CONTROL

Reduce Your Visual Signature

Blackout covers conceal each individual LED. Slide the covers into place to control your light signature inside the vehicle, and easily open to reveal the operating status of the device.

CUSTOM DESIGNED DUAL-BAND VEHICLE ANTENNAS

Maximise Performance, Minimise Installation Footprint

Our Dual-Band Vehicle Antennas enable both RF frequencies to operate simultaneously, while only requiring 3 antennas on the vehicle.

Both Vertically and Horizontally Polarised dual-band antennas are available.

We recommend installing (2) Vertically Polarized and (1) Horizontally Polarised antenna to significantly increase your performance.

REPLACEABLE RF MODULES

Depot Level Maintenance

The RF Modules are external and easily replaceable, allowing for quick depot level maintenance if damaged.

The modules can also be easily upgraded when new versions are available.

Speak to one of our specialists about your project